Products

ミニモーター ギヤヘッド

B16 - ミニモーター ギヤヘッド

B16

当社のB16平歯車ギヤヘッドとブラシ付きDCコアレスモータを組み合わせることにより、要求の高い高効率アプリケーション向けの単一の工場一体化ソリューションが提供されます。その平歯車コンパウンドギヤトレイン配列により、モータと同じ軸で出力を行うことができます。B16ギヤヘッドの固有設計により、全体の効率が上がり、ノイズが低下します。これは、医療ポンプ、セキュリティ、アクセス、および高級品のような広い範囲のアプリケーションにおける要件となっています。

モータの特徴

  • 追加の比率については、下記リソースタブから仕様PDFをダウンロードし下さい

  • 競争力の高い価格で実現する高精密高性能

  • 5:1 ~ 2187:1 の減速比

  • 高いパワーウェイトレシオ

  • スリーブおよびボールベアリングオプションが利用可能

  • コンパクト設計

  • 定格トルク 0.12 Nm

  • アプリケーションニーズに合わせてカスタマイズ

ご利用可能なカスタマイズ

  • シャフトの長さ
  • 取り付けフランジ
  • 特別潤滑油
    仕様 + 詳細
    リソース
    ミリ 英語
    Ratio{%|%}unit 5.0 15.0 27.0 45.0 135.0 141.0 243.0 405.0 1 215.0 2 187.0
    Number of gear stages 2 3 3 4 5 5 5 6 7 7
    Direction of rotation{%|%} = / ≠ = = =
    Efficiency{%|%}% 81 73 73 65 59 59 59 53 48 48
    Length{%|%}mm 10.5 13.0 13.0 15.5 18.0 18.0 18.0 20.5 23.0 23.0
    Length{%|%}in 0.41 0.51 0.51 0.61 0.71 0.71 0.71 0.81 0.91 0.91
    Weight{%|%}g 7.0 8.0 8.0 9.0 10.0 10.0 10.0 11.0 12.0 12.0
    Weight{%|%}oz 0.25 0.28 0.28 0.32 0.35 0.35 0.35 0.39 0.42 0.42
    Nominal Torque{%|%}mNm 120.0 120.0 120.0 120.0 120.0 120.0 120.0 120.0 120.0 120.0
    Nominal Torque{%|%}oz-in 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0
    Diameter{%|%}mm 16.00 16.00 16.00 16.00 16.00 16.00 16.00 16.00 16.00 16.00
    Diameter{%|%}in 0.63 0.63 0.63 0.63 0.63 0.63 0.63 0.63 0.63 0.63
    Operating Voltage (VDC)
    Resistance per Phase, ± 10% (Ohms)
    Inductance per Phase, typ (mH)
    Nominal Phase Current, 2 ph. On (A)
    Nominal Phase Current, 1 ph. On (A)
    Back-EMF Constant (V/1000 rpm)
    Back EMF Amplitude (V/ksteps/s)
    Holding Torque, MIN (mNm)
    Holding Torque, MIN (oz-in)
    Holding Torque Typical (mNm)
    Holding Torque Typical (oz-in)
    Holding Torque, 1.5x nominal current (mNm)
    Holding Torque, 1.5x nominal current (oz-in)
    Detent Torque, Typical (mNm)
    Detent Torque, Typical (oz-in)
    Rated Current per Phase (A)
    Detent Torque, Max (mNm)
    Detent Torque, Max (oz-in)
    Rotor Inertia (kgm²10^-7)
    Rotor Inertia (oz-in-sec²10^-6)
    Nominal Voltage (Volt)
    Optimization (rpm)
    No-Load Speed (rpm)
    No-Load Current (mA)
    Max continuous mechanical power (@ 25°C)
    Max continuous Current (A)
    Max Continuous Torque (mNm)
    Max Continuous Torque (oz-in)
    Terminal Resistance (W)
    Output Power (W)
    Stall Torque (oz-in)
    Stall Torque (mNm)
    Speeds up to (rpm)
    Torque up to (oz-in)
    Torque up to (mNm)
    Current up to (thermal limits)
    Torque Constant (mNm/A)
    Torque Constant (oz-in/A)
    Motor Regulation R/k² (10³/Nms)
    Motor regulation k/R½ (mNm/W)
    Motor regulation k/R½ (oz-in/W)
    Internal resistance - phase to phase (W)
    Line to Line resistance at connectors (Ω)
    Inductance - phase to phase (mH)
    Friction Torque (onz-in)
    Friction Torque (mNm)
    Rotor Inductance (mH)
    Mechanical Time Constant (ms)
    Thermal Time Constant (C/W)
    Absolute accuracy 2 ph. On, Full step mode (degree)
    Operating Temperature Range{%|%}C -30 to 65 -30 to 65 -30 to 65 -30 to 65 -30 to 65 -30 to 65 -30 to 65 -30 to 65 -30 to 65 -30 to 65
    Operating Temperature Range{%|%}F -22 to 150 -22 to 150 -22 to 150 -22 to 150 -22 to 150 -22 to 150 -22 to 150 -22 to 150 -22 to 150 -22 to 150
    Rotor Operating Temperature Range (C)
    Rotor Operating Temperature Range (F)
    Max motor speed (rpm)
    Ambient storage temperature range (C)
    Ambient storage temperature range (F)
    Ball bearings preload (N)
    Axial static force without shaft support (N)
    Max winding temperature (C)
    Max Winding Temperature (C)
    Max Winding Temperature (F)
    Max winding temperature (F)
    Hall Sensor Elecrical Phasing (degree)
    Typical Housing Material
    Continuous Stall Current (A)
    Peak Torque for 1s (mNm)
    Peak Torque for 1s (oz-in)
    Peak Current (A)
    Shaft Load Max Axial (lb)
    Shaft Load Max Axial (N)
    Shaft Load Max Radial (lb)
    Shaft Load Max Radial (N)
    Max. Holding Force* @ .001", 0.0254 mm (N)
    Max. Holding Force* @ .001", 0.0254 mm (oz)
    Max. Holding Force* @ .002", 0.0508 mm (N)
    Max. Holding Force* @ .002", 0.0508 mm (oz)
    Max. Holding Force* @ .004", 0.1016 mm (N)
    Max. Holding Force* @ .004", 0.1016 mm (oz)
    Min. Holding Force (Unenergized) @ .0005" (0.0127 mm) / Step{%|%}N
    Min. Holding Force (Unenergized) @ .0005" (0.0127 mm) / Step{%|%}oz
    Min. Holding Force @ 0.001", 0.0254 mm (N)
    Min. Holding Force @ 0.001", 0.0254 mm (oz)
    Min. Holding Force @ 0.002", 0.0508 mm (N)
    Min. Holding Force @ 0.002", 0.0508 mm (oz)
    Min. Holding Force (Unenergized) @ 0.003" (0.0762 mm) / Step (Un-energized){%|%}N
    Min. Holding Force (Unenergized) @ 0.003" (0.0762 mm) / Step (Un-energized){%|%}oz
    Min. Holding Force @ 0.004", 0.1016 mm (N)
    Min. Holding Force @ 0.004", 0.1016 mm (oz)
    Min. Holding Force @ rated current @ .0005" (0.0127 mm) / Step{%|%}N
    Min. Holding Force @ rated current @ .0005" (0.0127 mm) / Step{%|%}oz
    Min. Holding Force @ rated current @ .001" (0.0254 mm) / Step{%|%}N
    Min. Holding Force @ rated current @ .001" (0.0254 mm) / Step{%|%}oz
    Min. Holding Force @ rated current @ .002" (0.058 mm) / Step{%|%}N
    Min. Holding Force @ rated current @ .002" (0.058 mm) / Step{%|%}oz
    Min. Holding Force @ rated current @ .003" (0.0762 mm) / Step{%|%}N
    Min. Holding Force @ rated current @ .003" (0.0762 mm) / Step{%|%}oz
    Min. Holding Force @ rated current @ .004" (0.1016 mm) / Step{%|%}N
    Min. Holding Force @ rated current @ .004" (0.1016 mm) / Step{%|%}oz
    Stroke Length, Typ{%|%}mm
    Stroke Length, Typ{%|%}in
    Steps per Revolution
    Operating Temperature Range (C)
    Operating Temperature Range (F)
    Maximum Coil Temperature (F)
    Maximum Coil Temperature (C)
    Bearing Type
    Insulation Resistance at 500 VDC (Mohms)
    Dielectric Withstanding Voltage (VAC)
    Number of lines available
    Output signal
    Supply Current - maxium (mA)
    Supply Current - stand-by (μA)
    Supply Current - typical (mA)
    Supply Voltage (V)
    Max. Recommended Input Speed{%|%}rpm 8,000 8,000 8,000 8,000 8,000 8,000 8,000 8,000 8,000 8,000
    Number of lines available
    Thermal Resistance (C/W)
    Natural Resonance Frequency @nominal current (Hz)
    Electrical time constant (ms)
    Angular Acceleration (nominal current)
    Radial Shaft Play (µm)
    Axial Shaft Play (µm)
    Max Radial Shaft Load (oz)
    Max Radial Shaft Load (N)
    Max Axial Shaft Load (oz)
    Max Axial Shaft Load (N)
    Leadwire
    Type of encoder
    Power rate, nominal current (kW/s)
    Linear Travel Accuracy
    Input Power (W)
    Stepper Type
    Document Technology Document Type Language File Type
    B16 Specification Sheet ギヤヘッド 仕様  
    B16 drawing ギヤヘッド DXF形式図面  
    b16_0_1215 3D drawing ギヤヘッド 3D  
    b16_0_2187 3D drawing ギヤヘッド 3D  
    b16_0_243 3D drawing ギヤヘッド 3D  
    b16_0_729 3D drawing ギヤヘッド 3D  
    オートメーション用 小型モータ (brochure JPN) 資料  
    医療機器用の小型 モータ (brochure JPN) 資料